Continuous drying equipment for bauxite wet clay strip solves the problem of crushing in drying process.

- May 03, 2019 -

The technical difficulty of bauxite wet clay bar continuous drying equipment lies in ensuring the integrity of the material and avoiding the breakage of the drying clay bar, because it is directly related to the subsequent product quality, precisely controlling the moisture content and falling height of the material, and choosing the appropriate way of feeding and discharging, etc., which perfectly solves the problem of material breakage in the drying process. A multi-layer conveyor belt is arranged in the cavity of the continuous drying equipment of bauxite wet mud strip, and the conveyor belt circulates in the cavity. Material is evenly distributed on the first layer of conveyor belt. Through chain transmission, the first layer of conveyor belt is poured into the next layer of conveyor belt. The lower layer falls into the last layer of conveyor belt one by one in reverse alternation. At this time, material moisture also meets the drying requirements. The air circulation adopts counter-current technology. High temperature and low humidity air flows upward from the bottom mesh belt of the dryer to carry out mass transfer and heat transfer, so as to achieve the purpose of removing moisture. The exhaust gas is discharged from the top through the induced draft fan. The continuous drying equipment of bauxite wet sliver can adjust air volume, heating temperature, material residence time and feeding speed to obtain the best drying effect. The equipment configuration is flexible, and the belt washing system and material cooling system can be used. Flexible operation, wet material into the machine, drying process in a fully sealed box, better service conditions, to avoid dust leakage.

p>p>p>p>p>bauxite wet clay strip continuous drying equipment can not only dry the material, but also sometimes bake, ripen or cool the material. Unique air distribution device makes hot air distribution more uniform and ensures the consistency of product quality. The utility model has the advantages of simple structure, convenient installation, long-term operation and convenient maintenance when failure occurs. The continuous drying equipment for bauxite wet sliver solves the problem of fragmentation in drying process. The company provides various types of microwave drying equipment selection scheme and budget quotation. This paper is from the microwave drying equipment (www.bodawb.com) network.

上一篇:Microwave-hot-air drying process for instant noodles with vermicelli has good rehydration property 下一篇:Macadamia nut belt dryer with microwave hot air has better effect

Related News

Related Products