Passed the ISO9001 quality system certification and the establishment of industrial drying industry alliance standards under the guidance of the Chinese Standardization Research Institute.
- May 03, 2019 -
Nano-SiO_2 dryer does not need fuel, boilers, pollution, energy consumption, heat conduction, uniform heating, both inside and outside materials at the same time, drying speed is very fast. This is also one of the important reasons why our customers choose our products.nano-silica microwave dryer can design and manufacture nano-silica microwave dryer of different specifications according to the actual situation of users. Our company has microwave equipment test prototype, which provides free on-site production operation, and combines with the service provided by users'products. Welcome new and old friends to visit and negotiate. Nano-silica, also known as silica, is a very fine white powder, which absorbs water in the air and becomes aggregated fine particles. Silica has large specific surface area, porous surface and strong dispersion. After absorbing water or other solvents in coatings, it can form stable colloids. Besides being used as filler, it can also be used as inorganic thickener. Proper amount of silica used as coating filler will not reduce the covering power, but can also replace a small amount of expensive titanium dioxide. Microwave nano-silica dewatering equipment can be used for drying and dewatering of powdery and granular chemical raw materials. For example: nickel hydroxide, green silicon carbide, lithium carbonate, lithium hydroxide, copper sulfate pentahydrate, polymer, additives, cobalt oxalate, ammonia paratungstate, lithium cobalt, barium carbonate, lithium carbonate, silicon carbide, iron oxide, zirconium oxide, thermal sensitive materials, strontium carbonate, etc., the moisture content reaches 0.5% after drying from 40%, the drying time is only 6-15 minutes, and the drying temperature can be controlled at 80 ~90 C. C. The nano-silica dryer is economical and applicable, and can be used safely.
The characteristics of nano-silica dryer:
1.Compact equipment, small volume
2.High drying intensity, low energy consumption<3.Elimination of environmental pollution
4.High production efficiency
Nano-silica drying process: feeding hopper storage-mdash; natural cutting or mixing feeding-mdash; entering drying tunnel-mdash; drying treatment (adjustable and controllable) & mdash; outlet cooling-mda; Sh; product storage.
Nano-SiO_2 dryer equipment is also applicable to inorganic categories: boric acid, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide, various metal hydroxides, various heavy metal salts, synthetic cryolite. Organics: Atrazine (pesticide and insecticide), lauric acid, benzoic acid, benzoic acid, bactericide, sodium oxalate, cellulose acetate, etc.
nano-silica dryer economical, practical and comfortable to use, rest assured that the company can customize equipment according to customer material moisture content, output size, plant size, and material requirements. Microwave drying is different from traditional drying, and its heat conduction direction is the same as that of water diffusion. Compared with traditional drying methods, it has many advantages, such as high drying rate, energy saving, high production efficiency, uniform drying, clean production, easy to realize automatic control and improve product quality, so it has been paid more and more attention in various fields of drying.p>nano-silica microwave dryer to solve the two major pain points of slow drying and low quality. This paper comes from the microwave dryer () network.