Passed the ISO9001 quality system certification and the establishment of industrial drying industry alliance standards under the guidance of the Chinese Standardization Research Institute.
- May 06, 2019 -
The structure and description of electrostatic spray paint coil microwave dryer
< 1. Rollers for continuously conveying spray paint coil are installed in the unwinding device and the unwinding device. A driving motor for driving roll rotation is installed on the rollers. The unwinding device can also be without a driving motor, and the unwinding process is realized continuously by pulling the driving motor in the unwinding device. In order to keep the conveying direction of the spray-paint coil unchanged, a roll for adjusting the direction of the spray-paint coil is set on the side of the roll on the spray-paint coil. The structure of the rewinding device is basically the same as that of the rewinding device. A driving motor and a variable speed device are arranged in the rewinding room. The driving motor is used to drive the rolls in the rewinding room to rotate and drive the spray paint coil to move. It should be noted that the motor can adjust the speed, while the spray paint coil generally keeps a constant speed in the drying engineering. Microwave drying device of microwave drying device is mainly used for drying spray-paint coil. It includes magnetron, which is installed on the inner wall of microwave drying device and is mainly used for generating microwave; waveguide tube, which is connected with magnetron, is used to transfer microwave generated into the inner part of microwave drying device; microwave mixer, which is installed on the upper part of the inner wall of microwave drying device, is used to make microwave. The wave electromagnetic field is more uniform in the microwave drying device; the dehumidification device is installed on the top of the microwave drying device to expel water vapor quickly and ensure the smooth drying process; when there are many microwave drying devices, each microwave drying device can be controlled separately by PLC control device.p>p>p>p>p>3. The temperature sensor installed on the inner wall of the microwave drying device is used to detect the temperature in the microwave drying device in real time, especially near the spray paint coil, and send the detected temperature to the PLC control system. The humidity sensor installed at the entrance of the dehumidification device is used to detect the humidity in the box in real time and send the detected humidity to the PLC. Control system; Linear speed sensor installed on the outside of the roll axis is used to real-time detect the transmission speed of spray paint coil, and send the detected speed to the PLC control system. PLC control system is used to receive real-time data sent by sensors in on-line detection system. According to the real-time data received, parameters such as drying time, drying power and speed of spraying film are adjusted. For example, when the temperature received by the PLC control device is higher than the expected temperature value, the drying time can be shortened or the drying power can be reduced; when the humidity received by the PLC control system is higher than the expected humidity value, the drying time can be increased, or the drying power can be increased, or the air intake can be reduced.
This article is addressed at /news/Industry News/2018 DESF GRoSh H.html.